Performing a factory reset on your Holosun EPS Carry red dot is a relatively easy procedure, and can be useful for fixing issues or preparing the optic for sale. To begin, locate the small recessed reset pin on the left side of the device. You’ll need a thin tool, such as a pin, to depress the button. With the Holosun EPS Carry powered on, gently press and hold the reset button for approximately 5-7 seconds. You should notice the reticle briefly flash, indicating the reset process has begun. After the reticle returns, the Holosun EPS Carry will be returned to its original factory settings, removing any previously customized configurations. Remember to re-zero your optic after completing this process.
Resetting Your Holosun EPS Carry Red Dot: An Straightforward Guide
Need to fix a glitch or set up your Holosun EPS Carry red dot for transfer? A factory reset can often help. This quick guide will walk you through the procedure of wiping your EPS Carry to its original settings. Essentially, it deletes all user preferences and returns the optic to the way it was originally intended. Don't worry – it's a fairly simple task and won't damage your sight. Just adhere to these instructions carefully. We'll cover the button sequence needed to trigger the reset, emphasizing a cautious approach to guarantee a successful outcome. This technique is perfect for those transferring ownership.
Clearing Your Holosun EPS Carry: Original Reset Instructions
Sometimes, your Company's EPS Carry optic might exhibit peculiar behavior – perhaps the reticle isn’t appearing as it should, or the settings seem mixed up. In such cases, performing a original reboot can often fix the issue. This process returns the optic to its initial state, essentially erasing any personalized settings you’ve made. To initiate the reboot, first, ensure the optic is energized. Next, depress and hold both the left and front buttons at the same time. You should see the reticle briefly blink, indicating the reset process is in progress. Let go of the buttons once the reticle vanishes. Your EPS Carry is now reverted to its original configuration and ready for setup. Refer to your EPS Carry user manual for detailed information and any possible safety precautions before attempting this operation.
Initiating a Holosun's EPS Carry Factory Reset: A Straightforward Method
Need to clear your Holosun EPS Carry sight to its original settings? A works reset can be helpful for resolving issues, selling the optic, or simply starting over. Here's a step-by-step procedure click here to complete this action. First, ensure your EPS Carry is powered off. Then, depress and maintain the port pad while simultaneously pressing the right button. Continue holding both pads until the dot briefly fades – this confirms the reset is occurring. Finally, let go of both pads and allow the sight to restart. Your EPS Carry should now be restored to its original state. Remember that this deletes any custom settings you've programmed.
Clearing Your Holosun EPS Carry Red Dot Sight
If your device EPS Carry red dot sight is acting strange, displaying incorrect behavior, or you simply want to erase all custom settings, performing a reset to original settings can often fix the issue. The procedure is relatively straightforward and only takes a few seconds. Begin by locating the recessed reset button on the underside of the sight. This is usually covered by a minute plastic insert, which you will need to pry away using a slim object like a small screwdriver. Once you've revealed the feature, depress and hold it down while simultaneously powering on the sight. Continue holding the switch for approximately 5-10 minutes until the crosshair quickly fades, indicating the return is complete. Release the feature, and your EPS Carry should now be operating with its factory settings.
Performing a Holosun EPS Carry Factory Reset Process
To resolve unexpected behavior or restore your Holosun EPS Carry to its original settings, a factory reset can be beneficial. Typically, the reset requires a specific sequence of button presses. Begin by ensuring the optic is powered on, then quickly press and hold both the "On/Off" and "Brightness Up" buttons concurrently for approximately five to seven seconds. You should observe the reticle briefly flicker, indicating that the reset has begun. Once the reticle disappears, let go of the buttons. The EPS Carry will then restart to its default state. It’s important to consult the official Holosun manual for the most precise instructions, as minor variations might exist depending on the specific firmware version. Afterward, verify the reticle brightness and other settings, and adjust as needed.